🔥Limited Time Deal! Top-Rated Toilets
- Gray / Silver: 629.99 USD (10% off)
Days
Hours
Minutes
Seconds
Modiwell Dry Flush Toilet E4 Error: Analysis and Detailed Solutions
Easy steps to troubleshoot and fix the E4 error on your Modiwell dry flush toilet caused by garbage bag problems, foreign objects, or misaligned parts.
If you are using a Modiwell dry flush toilet and encounter an “E4” error code displayed on the control panel, don't worry. This error usually indicates that a current overload protection has occurred during the garbage bag pressing and clamping process (current overload protection: a “fuse” in the circuit, when the current is too high, it will actively trip and cut off the power to prevent danger.) Note: When the product is running, do not put your hands or other parts of your body into the movement to avoid injury. Below we will provide detailed and easy-to-operate solutions to help you quickly troubleshoot and restore normal use of the toilet.
How to Avoid the Occurrence of E4 Errors？
- Carefully check the sealing area before use: Before each use, take a few seconds to check whether there are any foreign objects stuck or stuck on the seal of the garbage bag, such as small stones, debris, hair, etc.
- Garbage bag film installation: The garbage bag film should be straightened when placed, and the arrow direction of the garbage bag strap mark should be upward, and the garbage bag film should be pulled out from the outermost side.
- Close the bottom baffle when not in use for a long time: If the toilet is not used for a long time, it is recommended to close the bottom baffle, which can effectively prevent foreign objects from entering the movement and help maintain the activity of the garbage bag material.
- Correct use of the guide: When installing a new garbage bag, be sure to remove the guide first and use it to guide the bag smoothly between the guide wheels of the movement. After installation, pull it out and put it back in place in time to avoid wrinkles or jams in the bag, which will cause uneven force during pressing.
Common Causes of E4 Errors
The E4 error of Modiwell dry flush toilets is usually related to the handling process of garbage bags. Here are some common reasons:
Wrong placement of garbage bag film
This is one of the most common reasons. If the garbage bag film is placed in the wrong direction or improperly during installation, Here are three ways to go wrong with garbage bag disposal:
Upside down: The arrow direction is placed incorrectly, the film is reversed, and the pressing resistance increases.
Wrinkles in garbage bag film: The wrinkles of the garbage bag film curl and stack, forming additional obstacles,causing E4 error.
Pulling out from the inside: The garbage bag film is twisted and entangled when pulled out from the inside, and the local resistance is too large, causing E4 error.
The above three situations may cause excessive resistance during the pressing process, exceeding the load of the motor, thereby triggering the current overload protection and displaying E4 error.
There are foreign objects in the sealing position
When the toilet is sealing and pressing, if there are foreign objects (such as small stones, debris, etc.) in the sealing position, it will hinder the normal sealing action, causing the motor load to increase and trigger the E4 error. (Note: When the product is running, inserting your hands or other parts of your body into the movement may cause injury)
The bottom automatic packaging auxiliary accessories are misplaced
Observe whether the bottom automatic packaging auxiliary accessories at the bottom of the toilet are placed correctly. If the bottom automatic packaging auxiliary accessories are misplaced, it may affect the normal pulling and sealing process of the garbage bag, thereby causing the E4 error.
Specific Solution for E4 Error
For the above possible reasons, we provide the following detailed solutions. Please follow the steps to check and operate:
The garbage bag film is placed incorrectly or entangled
Solution 1: Rearrange and place the garbage bag film
Please turn off the power switch of Modiwell dry flush toilet to ensure safe operation. Arrange the old garbage bag film, comb it and put it back. Pay attention to pull it up evenly about 20 cm from the first layer of the outer edge, grab the bag mouth, and insert it into the toilet mechanism.If you think it is troublesome to reorganize the old garbage bag or are not sure whether it can completely solve the problem, we strongly recommend that you directly replace it with a new Modiwell original garbage bag refill bag, which can usually solve the E4 error caused by the garbage bag more quickly and effectively.
Solution 2: Replace a new modiwell garbage bag film
For specific operation steps, please refer to the video operation:
- Turn off the power and remove the old bag: Turn off the power and completely remove the old garbage bag.
- Remove the pressure ring and base: Remove the cushion and garbage bag pressure ring respectively.
- Install the new bag (pay attention to the direction): Put the new garbage bag into the base, making sure the arrow of the strap is facing up.
- Cover the pressure ring and remove the strap: Cover the pressure ring and clamp it firmly, then remove the garbage bag strap.
- Pull up the film and insert it into the movement: Pull up the outermost film about 20 cm, grab the bag opening and insert it into the movement.
- Guide with the guide: Use the guide to insert the bag between the movement guide wheels, pull out the guide after completion and cover the cushion.
- Start the first seal: Press and hold the “Start” button for 2 seconds, wait 2-3 minutes to complete the first seal.
- Remove and resume standby: After hearing the prompt tone, remove the bag for the first seal, and the control panel returns to standby mode.
There is a foreign object in the sealing position
Solution: Clean the foreign object and restart the device
- Turn off the power: First, turn off the power switch of the Modiwell dry flush toilet to ensure safe operation. (To prevent misoperation, do not put your hands or other parts of your body into the movement when the product is running to avoid injury)
- Clean foreign objects: Carefully check the sealing position of the toilet and remove any possible foreign objects, such as stones, hair, etc. (Note: Be careful of burns)
- Turn on the power again: After cleaning, turn on the power switch of the toilet again. The device usually returns to normal automatically.
The automatic packaging auxiliary accessories at the bottom of the toilet are misplaced
Solution: Adjust the position of the automatic packaging auxiliary accessories at the bottom
- Check the automatic packaging auxiliary accessories at the bottom: Carefully observe whether the automatic packaging auxiliary accessories at the bottom of the toilet are in the correct position.
- Adjust the automatic packaging auxiliary accessories at the bottom: If the automatic packaging auxiliary accessories at the bottom are found to be misplaced, adjust them to the correct position.
Seek Modiwell After-Sales Support
If you have tried all the above solutions and the Modiwell dry flush toilet still displays the E4 error, in order to protect your rights, please contact the Modiwell official after-sales service center in time for professional technical support and repair help.I hope the solutions provided in this article can help you solve the E4 error of the Modiwell dry flush toilet and make your smart life more convenient and comfortable!
3 Color Options
For the dry flush toilet, we offer you 3 colour options to match your favourite pick:
White
Discover the perfect blend of functionality and elegance for your outdoor events—clean, portable, and always ready to use!
Silver
Experience modern design and convenience with our innovative, water-saving toilets. Transform your restroom now!
Grey
Elevate your bathroom aesthetics while enjoying hassle-free, eco-conscious hygiene solutions. Discover the future of toilets!